The Flare

Description

***These are the newest version of the Flare. The bugs from the first batch are supposed to be worked out***

The Flare is a collaboration between BFG and YLL Vape. It’s an absolute beast of an induction heater made for the Dani/Fusion lineups. This induction heater runs off of (3) 18650 batteries and runs up to 120W( adjustable). It has an adjustable stopper to really dial it into your liking. It also has a timer feature to set it and forget it. Timing will be different between devices. Available with or without batteries.

Running recommendations:
Fusion:

100w-120w 35-45 sec, stopper set at the lowest setting with the battery plate still fitting on.
Stunner:

Registers at 70w for 50-55sec with the stopper set at the highest setting.
Hyperdyn:

60w-80w 25-30 seconds with the stopper set at the lowest setting. It will work at 120w, but it’s way too much heat all at once. I have combusted every time at the click and 120w
Armored Cap:

80w-100w, 20-25 seconds with the stopper at the lowest setting with the battery plate still fitting on.
TA3:

100w-120w for 30-35 sec with the stopper set as high as it will go. I added an extra 8.5mm stopper from my yll2.0, and it worked great.
Thermocore without sleeve:

Registers 60w – 70w at roughly 60 seconds with the stopper set at the lowest setting with the battery plate still fitting on.
Thermocore with sleeve:

Registers a max 120w for 27-30 sec with the stopper set at the lowest setting with the battery pack still fitting on. It works better at lower wattages.
Duracore without sleeve:

Registers at 65w-80w at 45-50 seconds with the stopper set at the lowest setting with the battery plate still fitting on.
Duracore with copper sleeve:

Registers at 120w for 25 to 27 seconds with the stopper set at the lowest setting with the battery plate still fitting on. Works better on lower wattages.